Re: Off Topic... small power supply hell.

On Thu, 29 Sep 2005 15:47:44 -0700, "Joe B" <moving@xxxxxxx> wrote:

>On Thu, 29 Sep 2005 15:46:45 -0700, "Wood Butcher" <nospam@xxxxxxxx> wrote:
>
>>You must match the voltages, 12V, which you have done.
>>The amps of the supply must also be equal to or greater than the
>>requirement of the device. This is ok too as 500mA is greater than
>>100mA(0.10A)
>>One more thing is you have to match is the AC or DC requirements
>>of the device and the supply.
>>
>The pad says DC and the Adapter says AC so I guess I have to find a different
>one.:(
>Only 20 more boxes to search.

check carefully. it might be AC input and DC output.
.

Relevant Pages

  • Re: Blackface a Silverface Super Reverb
    ... Rich Koerner wrote: ... Change 5u4 rectifier tube to 5ar4/gz34 and check bias ... Not to mention that the other voltages in the amp ... you find SF amps with the old BF power ladder ...
    (alt.guitar.amps)
  • Re: JCM 800 confusion
    ... EVH also liked lower voltages, ... If you're Marshall is too loud, and you want more distortion at slighlty lower levels, you might like lower voltages. ... And I definitely don't think "high voltage bad" in all amps. ...
    (alt.guitar.amps)
  • Re: Arent there any cell phones that work?
    ... The big difference between AC1 and AC2 is AMPS, and the difference in terms of area is very large. ... Large areas of "roaming or no coverage" disappear when you switch from AC1 to AC2. ... The good thing is that the carrier can't shut it off until they replace it with digital, as the call boxes need to be kept in service. ...
    (alt.cellular.verizon)
  • Re: Guitar cable vs speaker cable?
    ... speakers on the other hand are current operated devices - the voltages are ... are rather large, maybe in the order of 10-20 amps, dpending on your ... I've used instrument cables in a pinch for short distances, ... doubt my simple calculations are obviously flawed, ...
    (alt.guitar.bass)
  • Re: 208 3PH question
    ... Of course the voltages and currents ... Watts = power = work. ... VA is volts x amps but ELI the ICE man comes into effect. ...
    (rec.crafts.metalworking)