Re: STEP LIFT
"J T" <Jakofalltrades@xxxxxxxxx> wrote in message
>
http://www.atsolutions.org/devices/step_lift.htm
>
> I'm not sure if it uses wood, or not. Regardless, this might come
> in handy for a few of you.
It's a car lift. No wood involved, but could be a cheap option for someone
needing a lift. While wheelchair vans with lifts eventually die just like
any other vehicle, the lifts are often salvageable and could be a good
alternative to spending $10,000 on a dedicated lift originally designed for
the home.
.
Relevant Pages
- Re: Frankenbug
... one with links to pictures of another Beetle that mario (aka Small ... needed and use it as a body lift kit for my Beetle. ... I could probably do the lift for under $100 including the wood, ... I don't know about the Trabant but the Morgan used to. ...
(rec.autos.makers.vw.aircooled) - Re: Frankenbug
... needed and use it as a body lift kit for my Beetle. ... Probably wouldn't be any heavier than if I used a steel kit and ... Wood should work just fine. ... I'm pretty sure the first beetles had wooden floorboards. ...
(rec.autos.makers.vw.aircooled) - Re: Frankenbug
... needed and use it as a body lift kit for my Beetle. ... Probably wouldn't be any heavier than if I used a steel kit and ... Wood should work just fine. ...
(rec.autos.makers.vw.aircooled) - Re: Greene & Greene Style
... How much fun and games were involved in getting the matching ... "cloud lifts" in the drawer faces? ... I imagine having a drawer face with a "lift" must've presented ... held in place and still allow for wood expansion and contraction? ...
(rec.woodworking) - Re: Finish for shower bench
... was $66 vs. $240 for teak so I hope my choice doesn't haunt me later. ... The better wood would have been cedar nicely sanded, ... breathable finish like oil or water sealing stain, nothing to lift off. ...
(rec.woodworking) |
|
