Re: Cam rigging instructions

OK, thanks!
As I can see on this links, there is always some wraping of the sail in the
boom cut out area during sliding the mast into sleeve, and it is like that.
I was just waried that I m doing something wrong, because that is the place
where sail monofilm started to break. So I ll just had to use some tape, and
reinforce that monofilm area!

"jt" <no_looseleach_spam@xxxxxxxxx> wrote in message
news:1149012973.124800.253500@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Gaastra's site had nicely illustrated guides to rigging sails,
threading downhaul, etc.

I think the link to the sail rigging section is:
www.gaastra.com/index.php/g/support/rigging_guide/rigging_up/race
but otherwise go to the site home page and get to the Support or
Rigging section:
www.gaastra.com



.

Relevant Pages

  • Windwing (WW) breakage / manufacturing quality problems. "Only our Chinese masts break" (John, sale
    ... Part II: Extra mast ... Sail breaks before being on the water ... John told me that the FF are notoriously difficult to ... Windwing Hammer with RDM mast. ...
    (rec.windsurfing)
  • Re: halyard fixing system for 14 catamaran with jib?
    ... to sail it up the coast of australia, and have ben sailing it 3 times weekly and updating what needs to be changed bit by bit, cleats, rigging, shrouds etc etc, the halyards are a pain to me. ... The main halyard clips in with a shackle on a bowline to a dinky little d ring on the mast, then is tensioned with a downhaul rope through a pulley then back up to a clam cleat. ...
    (rec.boats.cruising)
  • Re: Long extensions
    ... Lucky states that his 6.4 m2 sail recommends a 430 mast with an overall luff length of 463 cm. He's tried this sail with a 430 IMCS 21-23 mast and 33 cm of extension and finds it works much better than with his 460 cm IMCS mast with a 3 cm extension. ...
    (rec.windsurfing)
  • Re: IMCS
    ... Some sails are notorious for needing their own manufacturer's mast (bullshit ... Sail makers are not morons, ... How are changes made to a mast's bend curve? ... "standard" and that the sail brands you list are capable of high ...
    (rec.windsurfing)
  • Re: IMCS
    ... I think there are a lot of reasons for dominant players to do things ... smaller companies pick a mast, ... not considering practical and human reasons why sail makers go in ... specs from the same manufacturer we can understand ...
    (rec.windsurfing)