Re: KH 2007 Products- details & info are here




Well I have not ridden them yet obviously but they look great. The new
hub and cranks look nicer in my opinion than the 2005 and the reduction
in q factor is a good thing from my point of view.

I'm not sure about the drilled rims as I don't know how strong it would
be comparatively speaking but the added width should add stability and
reduce tyre folding.

The double bolt seat post clamp is definately somthing that is long
overdue.

I will leave judgement until I have had a chance to actually ride these
but they look good.

I'm curious about the justification for the change of spline pattern on
the hub however as it means that new cranks will not be compatible with
the older hub. It is good that all the major unicycle manufacturers are
moving towards the ISIS hub as it will allow for interchange of parts
if there are supply difficulties for certain parts but there should
also be an assurance that cranks will still be made for the old hub as
replacing the whole hub if cranks are damaged is expensive but will be
necessary if cranks are not available.

Looking forward to riding them.

Plumsie (another climber and geologist)


--
plumsie
------------------------------------------------------------------------
plumsie's Profile: http://www.unicyclist.com/profile/9800
View this thread: http://www.unicyclist.com/thread/53289

.



Relevant Pages

  • Re: profiles vs. koxx1
    ... sure how many rims I went through in that time, maybe 15 or so, plus I ... The KH/Onza Hub/crankset, and the KH rims, were designed based on these ... The KH/Onza hub has a much better shape than any other uni hub for rim ... separately and attached to the axle with the same splines as the cranks. ...
    (rec.sport.unicycling)
  • The Ultimate Touring Machine?
    ... Cranks: Double-hole Moment cranks in 150mm/125mm length (Would it be ... and more technical muni and city riding on the ... Hub: I've been riding a non-geared UDC hub for a while. ... lower gear of the geared hub, ...
    (rec.sport.unicycling)
  • Re: unicycle advise
    ... If you do you'll break the hub ... and/or cranks ... Then you'll have a bombproof uni. ... Edit: Nimbus trials from 'Justonewheel.com' ...
    (rec.sport.unicycling)
  • Re: Stripped Miyata hub threads
    ... With the Loctite I never re-torque the crank nuts just to see if they're ... I don't change the cranks on the Coker very often. ... If the hub didn't get hardened correctly it could cause the ... the muni ride was great. ...
    (rec.sport.unicycling)
  • Re: Stripped Miyata hub threads
    ... With the Loctite I never re-torque the crank nuts just to see if they're ... I don't change the cranks on the Coker very often. ... If the hub didn't get hardened correctly it could cause the ... the muni ride was great. ...
    (rec.sport.unicycling)