2003 Polaris Virage missing problem?...Plz help



Hello all,

I have a 2003 Virage 700 with like 30 hours on it...

Just bought it from the dealer...was ridden very gently by older
people...

My problem -
I rode it for about 2 hours one day, it ran great all day until it
starting running really badly above 4000 RPM - Missing, Dying,
sputtering.
I was acting like it was running out of GAS...It will run up to max rpm
from dead start, but then die back out.

What I did to attempt to fix -
1. Filled it up with Premium Gas...It had like 1/2 tank.
2. Changed Plugs to new.
3. check oil...It was full
4. Made sure gas was on.
5. Took it back to dealer...They said the plugs were fouled but could
find no other problem.

I seem to think that it may be an electrical problem...Like maybe the
powerpacks...The dealer said they could not get it to do the problem I
reffered to...I asked them to go out and ride it for a coupla hours to
see if it is a heat issue or something...Like it fails only after it
has been running for a while.


Any ideas?????


4th of July weekend is coming up and I want to make sure its ready to
go.

Any help would be much appreciated.

.



Relevant Pages

  • Re: Tried running the quincy compressor
    ... (also finally changed plugs and connectors from ... It is many times quieter than ... It was twice as loud at 450 RPM on a 1 Hp motor, when I went to a 2 Hp motor and changed the pulley to get 915 RPM, I was a bit surprised when it got quieter. ...
    (rec.crafts.metalworking)
  • Re: Stroboscopic effects on lathe
    ... certainly not at 50 rpm. ... Some years ago we bought a large industrial strobe unit with remote ... housings on the lathe with loads if internal fins to 'stop the housing ...
    (uk.rec.models.engineering)
  • Re: Stroboscopic effects on lathe
    ... certainly not at 50 rpm. ... Some years ago we bought a large industrial strobe unit with remote ... This was a background no natural light at all and all light ...
    (uk.rec.models.engineering)
  • Help replace hard drive
    ... The hard drive was only 5400 rpm so I ... bought a Western Digital 40 GB 7200 rpm HD as an upgrade. ... image to the new HD but I couldn't get it to boot. ... Data Lifeguard application I did a "make HD a bootable HD" ...
    (microsoft.public.windowsxp.hardware)
  • Re: Performance profile...
    ... or if it goes back to birth of the engine. ... The first time I bought my Opti in for service, ... 3000 and 3800 rpm, but under 1000 rpm is probably second. ...
    (rec.boats)