Re: seeking hp hose with 1000bar and 2-jet nozzzle with above 1000bar

<KZYZ_001010@xxxxxxx> wrote in message
news:1153186731.908671.304410@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

Hello folks:
We are a manufacture of hp pump in china, at present we need hp hose
with 1000bar and 2-jet nozzzle with above 1000bar urgently, is there
anyone can offer us , pls contact me at
kevintian126@xxxxxxx

<cough>

1000 bar.

Water, air, helium....?

Crude oil?



.

Relevant Pages

  • Re: seeking hp hose with 1000bar and 2-jet nozzzle with above 1000bar
    ... We are a manufacture of hp pump in china, at present we need hp hose ... with 1000bar and 2-jet nozzzle with above 1000bar urgently, ...
    (rec.scuba)
  • Re: Power Steering Fluid Leak
    ... lead me to check the power steering fluid level. ... I then took the hose at the bottom of the resevoir whcih was ... started work on taking the pump out. ... of the pump is very likely leaking at one or both of it's crimped ends. ...
    (rec.autos.tech)
  • Re: flow issues with transfer pump
    ... The heat softens the hose and it leaks. ... up in the pump head and stop the flow. ... Cavitation should not be a problem as long as you have the proper flow to ... (the height of the sparg water ...
    (rec.crafts.brewing)
  • Re: check valve
    ... no useful purpose on a pump that pushes the water out unless your hose to ... valve sucking up the stuff that floats around in bilges can be relied upon ...
    (rec.boats.cruising)
  • Re: Hoses
    ... pump inlet using PVC? ... The standard hose outlet fitting takes, of course, 1.5" hose. ... A standard waste pipe rubber coupling sleeve goes over both. ... When I rebuild the pump, ...
    (rec.boats.cruising)