Opinion of these scanners



I inherited the following scanners..
PRO-46
PRO-92 (Win92 software and a data cable)
PRO-2052 (Data cable and ScanControl Software)
A few different types of antenna and miscl stuff.

So after a LONG time away from recreational listening I find myself
equipped to be back in the hobby

I've done some research and found some information but I was wondering
if any of these scanners should get a "particular job". For example
the PRO-2052 will become my "active frequency seeker" and research
leads me to believe it is the one to use for MilAir, but I can't seem
to turn up much specific info on the other units.

Thanks for the input


Drifter
"I've been here, I've been there..."
.



Relevant Pages

  • Unused Antenna Port ?
    ... I will be using a single antenna going to an A/B switch so I can feed the ... Was wondering if having the scanners antenna input jack just "floating" ... accidentally, and the port is floating as before, any potential liklihood of ...
    (rec.radio.amateur.antenna)
  • Re: Splitter For Two Scanners ?
    ... antenna in my attic. ... I would like to "permanently" have both scanners attached to the single ... pro models) by a whole bunch ... performance enhancements for nearly all current home scanners. ...
    (rec.radio.scanner)
  • Re: Unused Antenna Port ?
    ... I will be using a single antenna going to an A/B switch so I can feed ... Was wondering if having the scanners antenna input jack just ... Receive only antenna inputs, you might consider putting a 1M ohm ...
    (rec.radio.amateur.antenna)
  • Re: Splitter For Two Scanners ?
    ... antenna in my attic. ... I would like to "permanently" have both scanners attached to the single ... What type of losses would I expect? ... THe spliter will cut your signal to both scanners by more than 50% if you use both or not. ...
    (rec.radio.scanner)
  • Re: Splitter For Two Scanners And One Antenna ?
    ... antenna in my attic. ... I would like to "permanently" have both scanners attached to the single ... What would you recommend as a reasonably low cost splitter for this? ... one is high bands, the other low bands; ...
    (rec.radio.amateur.antenna)