Re: Antenna Recommendation

Good thought, but the mirrors on new trucks are completely covered by a
black plastic piece.

"Steveo" <moparholic@xxxxxxxxxxx> wrote in message
news:20070421012323.235$sl@xxxxxxxxxxxxxxxxx
"Robert A. Turpin" <raturpin@xxxxxxxxxxxxx> wrote:
I just leased a brand new 07 pickup truck, and I have a Mirage 6600 radio
converted for
use as a CB.

I have some limitations on antenna choices, such as I park in a parking
garage every day
for work. Not to mention that I don't want to scratch the paint with a
Magnet Mount
and sonce it's a lease, a permanent roof mount is out. I was thinking of
either a 108"
steel whip attached to the trailor hitch, or 2 fiberglass whips on each
front side of the
bed.

I might get an amp later, so performace means alot also.

Thanks for your advice!

Mirror mount?

--
http://NewsReader.Com/


.

Relevant Pages

  • Re: wireless reading of electric meter
    ... I've been tempted to go old school and just mount a couple mirrors so ... I can read it inside- but a digital reader would be handy- and ... something that plugs into a computer & records usage would be ...
    (alt.home.repair)
  • Re: Mirror Mount Question
    ... I'm using 1" square mirrors and a 1" cube BS and tried using Edmunds ... Before I set off on a possibly expensive custom mount I thought I 'd check ... If you use our KC1 kinematic mount together with a SM1Z Z-Axis mount ...
    (sci.optics)
  • Mirror Mount Question
    ... I'm using 1" square mirrors and a 1" cube BS and tried using Edmunds ... Before I set off on a possibly expensive custom mount I thought I 'd check ... possibly with a differential type adjuster together ... tilt (for controlled fringe formation) in the Z axis to be controlled. ...
    (sci.optics)
  • Re: Antenna Recommendation
    ... I have some limitations on antenna choices, such as I park in a parking ... garage every day ... a permanent roof mount is out. ... steel whip attached to the trailor hitch, or 2 fiberglass whips on each ...
    (rec.radio.cb)
  • Re: re-attach a mirrored metadevice
    ... install) one, just mount the ctd devices at different points, copy the ... tree over, unmount, attach the mirrors and they'll "sync" (but since ...
    (comp.sys.sun.admin)
Loading