Re: HB VHF low-pass filter

Actually 6 dB may be of some help, since the problem is probably caused
by 3rd order intermodulation between two signals and the attenuation of
the intermodulation product will be greater. However, as the others
have pointed out a low-pass filter is not likely a good solution.
Either the notch filter suggested or a bandpass filter should be
better. There are some 2m bandpass filter designs in the RSGB VHF/UHF
Handbook 3rd edition, if you can borrow a copy.

73,
Steve VE3SMA

.

Relevant Pages

  • Re: time-varying single low-frequency sinusoid filtering
    ... sinusoid, but my DSP skills are mediocre (I've had formal classes in ... I was thinking that a plain old bandpass filter from 0.25 to .5Hz might ... your actual and desired signals a simple average of the surrounding two ...
    (comp.dsp)
  • Simple Filter question (i think...)
    ... but I'm having a problem in Matlab. ... Eventually I'll have more signals, but for now I'm trying to design a bandpass filter that passes only tx1. ...
    (comp.soft-sys.matlab)
  • Re: is this possible?
    ... You need to filter out the signals from the other antenna, because even though it is pointing a different direction, it will still pick up the other channels except they will be slightly out of phase with the other antenna. ... bandpass filter) is available but not cheap. ...
    (alt.tv.tech.hdtv)