Re: SG-230 problem

Yes, that is exactly the same manual as mine.
How would I connect the 1N4148 2-pin to the 3 pads that are under the SM
3-pin diodes, will this even work?

If it is possible I would have to mount them vertical.

73 Andy


"Cecil Moore" <nospam@xxxxxxxxx> wrote in message
news:xrpQj.530$506.196@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Andy wrote:
My manual is a Revised: November 2000. The Document number for the
schematic, Q30102000E Rev: A Dated February 17, 1992. It looks to me to
be the wrong schematic for my PCB board. Maybe some one might know if it
is or not or have the correct one that they can send me?

This one is copyrighted Nov. 2000

www.sgcworld.com/Publications/Manuals/230man.pdf

All it says about the diodes is that they are either D5, D7, D9 etc. It
doesn't say what they are.

Yes, it doesn't say but if it were me, I would replace the
blown diodes with 1N4148's (assuming discrete diodes will
fit in the SMD pad space).
--
73, Cecil http://www.w5dxp.com


.

Relevant Pages

  • Re: Need help with surface part ID and finding a schematic
    ... I fix surface mount power supplies for a living and still I can't recognise ... instance the pink non-surface mount 15/16 items are diodes but could be any ... a triac or whatever. ...
    (sci.electronics)
  • Re: quick question on AS-2518-54 Bally Rec board what are CR5-CR8?
    ... Scorching under these diodes is common for the -54. ... when I repair them (6 Amp) and mount them up off the board a bit to ... Steve Kulpa (cargpb10) ...
    (rec.games.pinball)
  • Re: Small/cheap/easy 3V power supply
    ... exist, and either combine the cables, or mount it on the tool. ... He was not proposing dropping the mains voltage with diodes, ... If he has a 6V wall-wart and a LM317 then that would be ideal. ...
    (sci.electronics.design)
  • Re: Small/cheap/easy 3V power supply
    ... similar diodes, if not more. ... I'd personally get a small 9switching) AC/DC adapter (very small ones exist, ... and either combine the cables, or mount it on the tool. ...
    (sci.electronics.design)
  • Re: diode-connected transistors
    ... Terry Given wrote: ... I believe at's actually avalanche breakdown. ... > sometimes I use them as diodes. ... mount in a thermally meaningful way). ...
    (sci.electronics.design)