Re: Antenna suggestions for Vertex FTL-2011 mounted on Metal and fiberglass railroad equipment.

On Feb 28, 9:18 am, DVoeltz <dvoe...@xxxxxxxxxxxxx> wrote:
I'm new to this and need your help in selecting which antennas to use
on my railroad motorcars.

The radio will be moved between two pieces of equipment. One cab has
a flat metal roof and the other has a fiberglass cab. I would like an
antenna that I can unscrew from the cab when traveling the equipment
down the road on a trailer. The radio will be using the NARCOA
licensed frequency of 151.625 MHz. I understand that this frequency is
in what is known as the VHF-High Land Mobile Radio (LMR) Service band,
and uses a modulation known as narrow band (5 kHz deviation) FM. I
will be using a Vertex FLT 2011 40 Watt radio.

Based on the little I know about this, I understand a special antenna
will be needed for the fiberglass cab since there is no ground plane.
Both antenna will be mounted directly to the roof through a hole. The
radio will be mount within 2 feet of where this hole will be drilled
so I only need a short wire to connect from the antenna to the back of
the radio.

If you can offer me suggestions as to which antennas to use, I would
be most appreciative. Please excuse me if I misused some of the
language of the hobby.

Thanks in advance.

Dave in Pierre, SD

To see pictures of what this equipment is, go to:

www.narcoa.org

Hi, Dave.
Sure looks like fun! Someone here in Redmond, Oregon has one of the
cars. Seen it parked on a truck and then on the ground in front of his
garage.

The antenna you want to use will in a large part depend on what
distance and over what terrain you need to communicate. If only a few
miles, then a simple ground plane antenna will work. The antenna will
add less than 18 inches to the height of the roof, so you may not need
to remove it for transport.

I am not familiar with the class of license you are operating under,
so will not comment on antenna brands or installation. This seems to
be a commercial type installation, rather than an amateur radio
installation, so a licensed installer may be needed. If so, they will
have the antenna information you need.

Best regards,
Paul, KD7HB
.

Relevant Pages

  • Re: wireless application
    ... temperature stabilize the radio. ... Absolutely no roof penetrations that I can take advantage of? ... Running the coax or CAT5 through a vent ... I've done some installs with the antenna inside the attic. ...
    (alt.internet.wireless)
  • Radio World Online: Sonys Tuner Is Rich in Features
    ... external balanced AM loop antenna. ... Sony also packed a wire dipole antenna, identical to the one that came ... full quieting signals to less than six. ... The infrared remote duplicates all the controls on the radio itself ...
    (rec.audio.opinion)
  • Re: If CW is dead....
    ... I tend to look at the whole antenna as a "tunable balun" which interfaces ... > myths of some amateur users. ... > The AN/PRC-104 IHFR (Improved High Frequency Radio) family debuted ... > like the old horse cavalry guidon pennant). ...
    (rec.radio.amateur.policy)
  • Shortwave Radio Listeners (SWL) : Are Your Antenna and Ground Really Working Together ?
    ... mean I have never actually grounded the radio before at my home. ... the shortwave bands, especially 60 meters and also on the BCB bands. ... and the Noise Level may go down a little. ... -iirc- the DX-SWL Shortwave Sloper Antenna ...
    (rec.radio.shortwave)
  • Re: U.S. Navy taking on pirates, sort of
    ... And you are debating whether certain aircraft did or did not have ... no, radio direction finding ... The control for rotating the RDF antenna was ... unit for processing the radio signals was housed in the rear fuselage ...
    (sci.military.naval)