Re: LPY antenna designs?
- From: K7ITM <k7itm@xxxxxxx>
- Date: Mon, 25 Feb 2008 14:48:32 -0800 (PST)
On Feb 25, 1:28 pm, "Dave" <no...@xxxxxxxxxxx> wrote:
"K7ITM" <k7...@xxxxxxx> wrote in message
news:2bb53d41-130f-4633-85f1-e9726e88c163@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
On Feb 24, 4:37 am, "Dave" <no...@xxxxxxxxxxx> wrote:
"K7ITM" <k7...@xxxxxxx> wrote in message
news:49115b34-632e-4cc8-bac6-1e820995e6d3@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Anyone have any practical LPY (log-periodic Yagi) antenna designs they
care to share? Something with about 4% or 5% bandwidth in the VHF/low
UHF range should do well--the element diameters should be appropriate
for scaling the design to my frequencies of interest. 10dBi or so
gain is probably fine.
Cheers,
Tom
define "log period yagi"??? ramsey has a line of products that they call
'log periodic and yagi' pcb antennas that has apparently been smushed
into
"LPY" as the prefix to their part numbers... but 'Yagi' antennas are one
thing, and 'Log Periodic Dipole Array' antennas are something else. The
only place they cross practically that i have seen is the use of a log
periodic section feed section in between yagi style tuned parasitic
elements
to give a wider bandwidth feed point... in this case it is usually just 2
or
3 elements worth of lpda feeding the yagi which i have always considered
just a way to add buzzwords to your antenna design description.
Yes, that's the design. I have data on a couple that suggest a pretty
"flat" gain across a modest range of frequencies, with a relatively
abrupt drop in gain outside that range. Googling got me to the
printed circuit antennas (I guess for wireless networks and the like),
but they aren't suitable to scale for what I want to do--too many
things different about them (flat elements on a dielectric substrate,
versus round elements in air).
Cheers,
Tom
for hf you want to look for 'owa', "optimized wideband array" antennas, and
also for yagi designs with dual driven elements like the m-squared 40m4lldd.
The advantages are a wider swr bandwidth and perhaps an improvement in the
gain or f/b bandwidth. you may also find some info searching for
'lpda-yagi' hybrids, though probably most of those are more for vhf/uhf.
Hi Dave, and thanks for the reply. I'll try some searches on those
keywords. Often, just finding the right keyword for a search is well
over half the battle.
I perhaps didn't make it clear that I'm interested in optimizing the
design for my particular application, which is up around 450MHz, so
designs already at VHF/low-UHF are probably going to have reasonable
element diameter-to-length ratios and may offer some ideas about good
mechanical design. I'll happily spend some time with simulations to
optimize the design for my application, but it helps a lot to start
with a design that's close to what I want in the final implementation
at least with respect to d/l ratios and percentage bandwidth.
Cheers,
Tom
.
- References:
- LPY antenna designs?
- From: K7ITM
- Re: LPY antenna designs?
- From: Dave
- Re: LPY antenna designs?
- From: K7ITM
- Re: LPY antenna designs?
- From: Dave
- LPY antenna designs?
- Prev by Date: Re: Oddball Antenna Question?
- Next by Date: Re: Sierpinski monopole/dipole carpet antenna (SC) for HF
- Previous by thread: Re: LPY antenna designs?
- Next by thread: Re: LPY antenna designs?
- Index(es):
Relevant Pages
|
