Re: LORAN - C

From: Wim Ton <wton@xxxxxxxxxx>
Date: Mon, 25 Feb 2008 22:33:09 +0100

Richard Clark wrote:

On Sun, 24 Feb 2008 08:32:17 -0800, "George" <nospam@xxxxxxxxxx>
wrote:

Anybody have a source of information on LORAN - C antenna design? Googling hasn't turned up much at all.

Hi George,

Use a CB whip with matching.

Can one use a ferrite antenna?

Wim
.

Follow-Ups:
- Re: LORAN - C
  - From: Richard Clark

References:
- LORAN - C
  - From: George
- Re: LORAN - C
  - From: Richard Clark

Prev by Date: Re: LPY antenna designs?
Next by Date: Re: Shortened radials: which length?
Previous by thread: Re: LORAN - C
Next by thread: Re: LORAN - C
Index(es):
- Date
- Thread

Relevant Pages

Re: Science Fair Project
... Richard Clark wrote: ... adult amateur radio enthusiasts the necessity of matching (a warning ... matching details for the massive SWR? ... Richard, I dare say that the 3 meter limit, and the horrible mismatch achieved with such an antenna just might be part of the whole idea of part 15 transmission. ...
(rec.radio.amateur.antenna)
Re: LORAN - C
... Richard Clark wrote: ... Use a CB whip with matching. ... for the 100 Khz Frequency and 100 Hz Bandwidth of Loran C Signals. ... level for the Units receiver, and normally, Notch Filtering, is ...
(rec.radio.amateur.antenna)
Measuring the fieldstrenght nearby is not reliable.
... When matching a very short whip one gets a big reading but ... Can a closeby fieldstrenght measurement be done? ... The magnetic field is also great with a short whip. ...
(rec.radio.amateur.antenna)