Re: Is this a loading coil?

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

John Smith wrote:
art wrote:

...
yep, and this is where you get the amps to melt them
down:http://www.davemade.com/mobile.htm

You may be looking at the spring between the antenna and the bumper
which allows a long whip style antenna
to bend with the wind while mobile
Art


Ohh that's a loading coil alright, seen plenty of 'em at
cb-swap/meets/shows in the midwest. The shows used to be a lot more
open, now you have to know someone or be invited.

He should be warned, those BIG mobile amps draw a lot of amps and you'll
be into adding extra batteries in the trunk and alternators under the
hood! (think ambulance/swat-team/military vehicle industrial alternators.)

Also, those BIG base amps can cause you to drop a new box into yer
house/shack to supply the power--above 5KW just gets too crazy, IMHO ...
and don't even think about it unless you have a place out in the boonies.

Anything above the smallest base amp with the big tubes is kinda
crazy--IMHO.

You want to run more power than that, think about starting up a real
am/fm broadcast station!

Regards,
JS

Hi, I'm not really sure what all of that means. I'm learning about
antennas, and I've been doing a lot of reading on the web until I can
get a copy of the ARRL Antenna book. I'm learning the terminology and
the other day read a thread about loading coils. I had no idea what that
was, so I went in search of an explanation. So, when I saw the radio
shop selling antennas with funny looking coils I wondered if that's what
a loading coil looked like. But I had expected a loading coil to be at
the bottom of the antenna, these looked like they might be in the middle
of the antenna. Does that even work?

BTW, I enjoy reading old threads from Roy and Cecil. A ton of great
information there. I have learned alot, and have much more to learn. I
want to try to make a 2 meter yagi (3 elements) this weekend and
experiment a little. Maybe I can finally hit that repeater 30 miles
away. ;-)

Jim

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (GNU/Linux)

iD8DBQFHM8yWQuDJiZ/QrH0RAuVCAJ9IVGKLg1XtBrsOcNFmI9jsTO1R3gCg05dW
56RRsfoNjTeiHMxWvymiiZQ=
=4zuW
-----END PGP SIGNATURE-----
.

Relevant Pages

  • Re: Current through coils
    ... You have a whip with a loading coil somewhere in the circuit under it. ... Anything feeding the antenna is in the path. ... is a periodic variation in volts and amps due to the combination of the ...
    (rec.radio.amateur.antenna)
  • Re: Is this a loading coil?
    ... You may be looking at the spring between the antenna and the bumper ... Ohh that's a loading coil alright, ... those BIG mobile amps draw a lot of amps and you'll ... I enjoy reading old threads from Roy and Cecil. ...
    (rec.radio.amateur.antenna)
  • Re: Is this a loading coil?
    ... You may be looking at the spring between the antenna and the bumper ... Ohh that's a loading coil alright, ... those BIG mobile amps draw a lot of amps and you'll ... I enjoy reading old threads from Roy and Cecil. ...
    (rec.radio.amateur.antenna)
  • Re: TV signal Amplifiers . What do u look for when buying one ?
    ... signals. ... Quality amps will be weather proofed and have an optional ... Amplifiers other than what is used on an antenna would only makes ... a difference of 3db is a 2:1 power ratio. ...
    (alt.home.repair)
  • Re: Signal strength meter for 802.11 wireless?
    ... > antennas for use with 2.4 GHz wireless network signals. ... > This would be just a raw antenna; 802.11 doesn't use amps at the antenna, ... that you need the full 802.11 receiver, which needs to acquire the signal ...
    (sci.electronics.design)