Re: Radiate Power Question ?


"Robert11" <rgsros@xxxxxxxxx> wrote in message
news:14WdnUoZc5u66aHbnZ2dnUVZ_gWdnZ2d@xxxxxxxxxxxxxx
Hello:

I realize that everyone is going to probably write back and tell me I'm
crazy, but this is really driving me crazy, so let me ask, please.

I'm a retired engineer, but have never worked much with RF.

I have been putting up several models of Kidde and First Alert smoke
detectors in my new house recently.

Several different models, from both brands, both ionization and
photoelectric, some with the 9V battery, some with
the built in 10 year Li cell.

All exhibit the same performance:

About once every day or so, at totally random times, they give 3 or 4
Chirps, then nothing for approx another day or so.
This is not the indication that it gives for an actual fire; rather from
the skimpy instructions they include, an indication of needing a new
battery, or some internal fault the circuitry has discovered on its own.

All the batteries are brand new.

Here's what I'm leading up to:

About a quarter of a mile from my house, in a direct line, there's a Ham
operator with a massive mast of what must be pushing 100 feet in height.
Almost the kind you would see for a small commercial station. Has all
sorts of antenna and beams mounted to it.
I have no idea what freq's he operates at, and really don't want to ask
him.

This is obviously a chap who takes his hobby seriously, and probably
radiates at the max allowable power levels, I would guess.

Is there any possibility that if he points his array at my house, it might
radiate enough power to cause my problem ?

If not, any thoughts on what else might be causing these chirps from two
different mfg's., and several models ?

Much thanks,
Bob


Possible.
Smoke detectors not supposed to be radio receivers. In other words, they
should be immune to RF interference. If they have wires going to them, they
work as antennas, pickup more RF and make things worse. Owner or
manufacturers should remedy the situation, usually bypass capacitor or
ferrite choke on the cables help.

Another solution, if there are no wires going to detector, is to insulate
portion of the circuitry with tape and wrap it in a aluminum foil, creates
the shielding and minimizes RF pickup.
Good luck.

Yuri, K3BU.us

I would approach ham and tell him about the problem. Most hams are decent
human beings and will try to sort the problem.


.

Relevant Pages

  • Re: Radiate Power Question ?
    ... crazy, but this is really driving me crazy, so let me ask, please. ... skimpy instructions they include, an indication of needing a new battery, or ... About a quarter of a mile from my house, in a direct line, there's a Ham ... radiates at the max allowable power levels, ...
    (rec.radio.amateur.antenna)
  • Re: Radiate Power Question ?
    ... crazy, but this is really driving me crazy, so let me ask, please. ... skimpy instructions they include, an indication of needing a new battery, or ... About a quarter of a mile from my house, in a direct line, there's a Ham ... Multiple sensors triggering means you ...
    (rec.radio.amateur.antenna)
  • Radiate Power Question ?
    ... crazy, but this is really driving me crazy, so let me ask, please. ... skimpy instructions they include, an indication of needing a new battery, or ... About a quarter of a mile from my house, in a direct line, there's a Ham ... radiates at the max allowable power levels, ...
    (rec.radio.amateur.antenna)
  • Crazy life
    ... maybe not crazy but busy as can be. ... So....he drove himself to the hospital ... cardiac patient and all came back clear and they sent him home. ... house where they had lived since 1982. ...
    (sci.med.transcription)
  • Re: Laptop Battery Usage
    ... > I might be crazy... ... I used the laptop with battery and it appeared that I got ... Battery life depends on a number of things. ... docking station or on AC power all the time? ...
    (Fedora)