2.4 GHz Yagi
- From: "pdrunen@xxxxxxx" <pdrunen@xxxxxxx>
- Date: 20 May 2006 21:49:24 -0700
Hi Group,
I looking at convering a TV UHF antenna to 2.4 GHz, the antenna has a
yagi part with elements spaced every 3 inches and the elements are the
same lenght of about 3 inches.
I think the 3 inch element lenght are a little long, and the elements
need to be cut so that one of them is the reflector and one as a driven
elements and the others would be come directors. There are about 10
elements on this boom.
The element spacing, 3 inches most likely will do OK ? comments?
A look in the handbook for 2.4 GHz antenna, either they don't include
them or I missed them. I have several old handbooks and ARRL antenna
books.
So, would as anyone who has some of the basic dimensions to pass that
along.
Also concerned that the frequency will require a SMA or Type-N and
matching, I don't have a means to check the SWR.
De KJ4UO
.
- Follow-Ups:
- Re: 2.4 GHz Yagi
- From: Tam/WB2TT
- Re: 2.4 GHz Yagi
- From: Jerry Martes
- Re: 2.4 GHz Yagi
- From: Bob Bob
- Re: 2.4 GHz Yagi
- From: Richard Clark
- Re: 2.4 GHz Yagi
- Prev by Date: Auto-Tuners with balanced antenna?
- Next by Date: Re: 2.4 GHz Yagi
- Previous by thread: Auto-Tuners with balanced antenna?
- Next by thread: Re: 2.4 GHz Yagi
- Index(es):
Relevant Pages
|
Loading