Re: antenna impedance - calculated 10 - 20 Ohms - measured 36 Ohms??
- From: dansawyeror <dansawyeror@xxxxxxxxxxx>
- Date: Mon, 27 Feb 2006 22:19:50 -0800
Good question. I will play with that. That said, based on Roy's comment at minimum the load should appear nearly pure resistive.
I just tested the Autek with 6.25, 12.5, and 25 Ohm loads.
25 read 26
12.5 read 12 - 13 - 12 etc.
6.25 read mostly 7 with an occasional 6.
I would say for non-reactive loads it is pretty close.
Tomorrow - will be to experiment with non lumped inductors. That will be a challenge.
Thanks - Dan
Frank wrote:
"dansawyeror" <dansawyeror@xxxxxxxxxxx> wrote in message news:4403C93F.2040700@xxxxxxxxxxxxxx.
Frank,
The Autek is remarkably close. I have used it to checkout 50 and 25 Ohm loads. For these two values it is very close. (It is battery level sensitive.)
The couplers are a pair of M-C ZFDC 20-4's.
Dan
Thanks Dan, I had forgotten about Mini-Circuits. Their price is hard to beat. I may pick up one of the "PDC" series dual directional couplers. Incidentally your code indicates resonance occurs at 3.54 MHz. I wonder how the Autek behaves when subjected to a reactive load does it actually get close to the magnitude?
Frank
- References:
- antenna impedance - calculated 10 - 20 Ohms - measured 36 Ohms??
- From: dansawyeror
- Re: antenna impedance - calculated 10 - 20 Ohms - measured 36 Ohms??
- From: Roy Lewallen
- Re: antenna impedance - calculated 10 - 20 Ohms - measured 36 Ohms??
- From: dansawyeror
- Re: antenna impedance - calculated 10 - 20 Ohms - measured 36 Ohms??
- From: Frank's
- Re: antenna impedance - calculated 10 - 20 Ohms - measured 36 Ohms??
- From: dansawyeror
- Re: antenna impedance - calculated 10 - 20 Ohms - measured 36 Ohms??
- From: Frank
- antenna impedance - calculated 10 - 20 Ohms - measured 36 Ohms??
- Prev by Date: Re: antenna impedance - calculated 10 - 20 Ohms - measured 36 Ohms??
- Next by Date: Re: antenna impedance - calculated 10 - 20 Ohms - measured 36 Ohms??
- Previous by thread: Re: antenna impedance - calculated 10 - 20 Ohms - measured 36 Ohms??
- Next by thread: Re: antenna impedance - calculated 10 - 20 Ohms - measured 36 Ohms??
- Index(es):
Relevant Pages
|