Re: visco fuse cutter


"Don T" <-painter-@xxxxxxxxxx> wrote in message
news:LfCdnU5If_jCI6DVnZ2dnUVZ_jSdnZ2d@xxxxxxxxxxxxxxxx
"Däve" <dtb200@xxxxxxxxxxxx> wrote in message
news:fLi%j.54137$7a.9124@xxxxxxxxxxxxxxxxxxxxxxxxx




Just go to the site: www.kelvin.com
Then search for product code = 990198 (as the link specified)
Comes up with ... StiKutter
Which appears to be a useful "kutter" for visco as the OP suggested.


That's not the point. The point is that when someone includes a link that
doesn't work very few readers will bother going any farther. Especially
when the reader already has a visco cutter that works quite well and has
done for 20 years. Most of the time I wouldn't have even commented about
the link not working but since there are so many new readers/lurkers on
this usnenet group I thought I would give the OP a heads up and thus a
chance to fix the link.

--


The link given by the OP is valid. The hyperlink feature in the newsreader
failed to include the
last character in the link which is an "=" sign. Copy and paste the entire
link which is common practice on failed hyperlinks and it will work. Or you
could just add an "=" to the end of the
address in the failed page.




.