Re: [SI] Brian's Comments

In article <FK7Re.2269$Z91.1585@xxxxxxxxxxxxxxxxxxxx>, wzrd@xxxxxxxxxxxx
says...
> The exposure is dead on, and the print looks beautiful... My scanner
> sucks and the underside of the glass is dusty. Since I don't really
> know what I'm doing with PSP, I couldn't get the image file to look more
> like the print. <shrug>

Bad scanner can really ruin photos for the web.

You might try editing the curves.
--
http://www.pbase.com/bcbaird
.

Relevant Pages

  • Re: Scanning objects - any tips?
    ... >>rectangular bag with the rectangular glass plate. ... scanner seems to always have a slight reddish cast. ... setting for rescanning for higher resolution it actually results in more ...
    (comp.periphs.scanners)
  • Streaks inside HP scanner glass
    ... streaks on the underside of the glass of my HP 2200c flatbed scanner. ... I'm going to need to open the scanner up and clean the underside if I ...
    (comp.periphs.scanners)
  • Re: Ways to reduce static electricity on flatbed scanner glass
    ... no matter how well I clean the glass, it doesn't take but a few seconds ... "Grounding" the scanner? ... I don't think that you can prevent that fiber from being drawn to ...
    (comp.periphs.scanners)
  • Re: Non-flat negatives -- odd sizes as well
    ... I'm using Epson V700 photo scanner. ... I've been reading about ANR glass, but most of the users are combining ... Best is to use the film holders. ... textured surface that is recomended on he ANR glass -- emulsion on scanner ...
    (comp.periphs.scanners)
  • Re: How to clean scanner glass - Visoneer 8900 USB flatbed
    ... That would be different for each scanner as they are all constructed ... remove the screws and then lift the glass and the ... before you do this make sure there is as little dust floating ... I usually vacuum the room first, ...
    (comp.periphs.scanners)