Re: Aristo cold head
- From: "Nicholas O. Lindan" <see@xxxxxxx>
- Date: Sat, 17 May 2008 08:12:05 -0500
"john" <x@xxxxx> wrote
On EvilBay there is an Aristo T12. .... Is there a particular "gotcha" to
beware of?
You may need to stick to graded paper - it looks like the
original 'actinic' tube. I had a head with this tube on
a D-series Omega and it only wanted to produce grade 4+
VC prints. Some people say they can get by throwing
a lot of yellow filtration into the system.
--
Nicholas O. Lindan, Cleveland, Ohio
Darkroom Automation: F-Stop Timers, Enlarging Meters
http://www.darkroomautomation.com/index2.htm
n o lindan at ix dot netcom dot com
.
- Follow-Ups:
- Re: Aristo cold head
- From: john
- Re: Aristo cold head
- From: Jean-David Beyer
- Re: Aristo cold head
- References:
- Aristo cold head
- From: john
- Aristo cold head
- Prev by Date: Re: Aristo cold head
- Next by Date: Re: Aristo cold head
- Previous by thread: Re: Aristo cold head
- Next by thread: Re: Aristo cold head
- Index(es):
Relevant Pages
|