Re: Warming methods

A) Leave them in a room at the 'normal' (20C/68F) room temperature for
a few hours...

B) Put the bottles in a large vessel with water in it warmer or colder
than the solutions until they are raised or lowered to the correct
temp. Leave the thermometer in the devloper, as it is not necessary to
measure stop bath or fixer temp if all three are kept together in the
same environment. It also risks contamination. When the developer is at
the right temp, begin.

This is so basic, I cannot imagine you have to ask...


Rex the Strange wrote:
> What methods do people recommend for getting chemicals to the correct
> "operating temperature"? Warm bath, on the stove, blowtorch, what?
>
> tia,
> rts

.

Relevant Pages

  • Re: Warming methods
    ... > A) Leave them in a room at the 'normal' room temperature for ... > B) Put the bottles in a large vessel with water in it warmer or colder ... > measure stop bath or fixer temp if all three are kept together in the ... It also risks contamination. ...
    (rec.photo.darkroom)
  • Re: Whats the minimum temperature for a server room
    ... > I'd like to know what room temperature is considered too warm/hot to ... > servers, and it is pretty warm in there, but I don't know at what point I ... Generally there's no safe vs non safe cutoff temp. ...
    (microsoft.public.windows.server.sbs)
  • Re: "Pie and chips"???!!
    ... You live in Chicago...your idea of room temperature is probably close to the ... temp on the inside of most refrigerators. ... Inviato da X-Privat.Org - Registrazione gratuita http://www.x-privat.org/join.php ...
    (rec.arts.tv)
  • Re: UPS and heater(s)
    ... The temp does get down to the low 50s during the winter months, hence the concern about the heaters. ... Where do you keep your fish tank if you have the room temperature at 50F? ...
    (rec.aquaria.tech)