Droopy Slide
- From: "El Alumbrado" <elalumbradoNOSPAM@xxxxxxxxx>
- Date: Fri, 24 Aug 2007 00:43:40 -0500
Maybe it was the 100 miles of dirt road. I've just noticed that the aft end of the galley slide in my coach is dragging on the floor as it's being extended or retracted. At full extension or retraction the slide seems to fit properly, but mid-way though the cycle the inboard edge of the slideout floor just below the fridge tips down and drags on the tiles. It looks like the aft end of the slide has dropped an inch or so in it's opening, just enough so that it no longer clears the floor at the low point in it's cycle. The only obvious adjustment seems to be a mounting bolt on the end of each ram arm. Being the naturally (often obnoxiously) curious type, I couldn't resist monkeying with these bolts. However, no adjustment I can make seems like it will keep the slide from dragging a groove in the tiles.
Any ideas?
Thanks,
Bill
--
El Alumbrado
Tempus Fugit, Memento Mori
--
Posted via NewsDemon.com - Premium Uncensored Newsgroup Service
------->>>>>>http://www.NewsDemon.com<<<<<<------
Unlimited Access, Anonymous Accounts, Uncensored Broadband Access
.
- Follow-Ups:
- Re: Droopy Slide
- From: R.J.(Bob) Evans
- Re: Droopy Slide
- Prev by Date: Re: for Will - San Diego Non-Smoking Ordinances.....
- Next by Date: Re: AC breaker trips with generator
- Previous by thread: OT--Where's Al (Jimmy Olsen) Balmbrain, Cub Reporter For The D.O.D.?
- Next by thread: Re: Droopy Slide
- Index(es):
Relevant Pages
|
