Re: Tips for getting a long cast?
- From: Rodney Long <rdlong@xxxxxxxxxxx>
- Date: Fri, 04 Jul 2008 08:15:45 -0500
Logic316 wrote:
Hi folks,
Generally speaking, what is recommended to obtain the farthest possible cast
from a spinning rod and reel? I've read in one magazine that the lighter
line you use, the less resistance you get and therefore the farther the
cast. But my dad always said that with a heavier line, you can use heavier
sinkers to get it out further. I've also read conflicting views on setting
up the reel spool and what size reel to use. I read in one fishing magazine
that keeping the spool as full of line as possible reduces the friction the
spool places on the line as it unravels during the cast (and when using my
hand to pull line off of a spool that's only filled halfway or less, this
does seem to be true). But I've seen other fisherman claim on the 'net that
the trick to a longer cast is to keep *only* as much line on the spool as
you need to make the cast and to allow sufficient line to play a fish,
because with a full spool the line will whip around in a wider circumference
and thus cause more friction against the rod guides during a cast. I've also
read that a small spool feeds out the line in a smaller circumference (and
thus places less friction against the rod guides), but one would think that
a smaller spool also causes the line to form tighter and more numerous loops
and have more "memory" which would cause more friction against the rod
guides as it's played out.
Any thoughts?
For the absolute longest cast, you use heavy "and" light line at the same time. About 25 feet of heavy line on the end, 400+ yds of light line spooled on the reel. The heavy line allows you to throw heavy weights (don't use weight higher than what your rod is rated for, rods do explode when casting too much weight "been there and done that")
Personally I use a "spectra braid" line as my heavy line
Regardless the key is a proper knot that will both hold and slide through the reel and rod eyes
This is the knot I use for putting lines together, some also like the Uni but this one out preforms it
http://ezknot.com/line2line.htm
For the long cast records most use 2 to 4 lb main line yet throw 4 or more Oz's of weight, the knot shown will even tie 2 lb to 50 lb mono, but I much prefer the Spectra braid for this application
--
SpecTastic Wiggle Rig,
Fishing lure remote control
See lure video you won't believe
http://ezknot.com/videos.html
.
- References:
- Tips for getting a long cast?
- From: Logic316
- Tips for getting a long cast?
- Prev by Date: Tips for getting a long cast?
- Next by Date: best place to buy chum & bait in the florida keys?
- Previous by thread: Tips for getting a long cast?
- Next by thread: best place to buy chum & bait in the florida keys?
- Index(es):
Relevant Pages
|
