Re: Loose Washers Under Tuner Bushings

Brian,

Have you tried tightening the nut that is between the bushing and the
washer?

Dave M.


.

Relevant Pages

  • Re: Loose Washers Under Tuner Bushings
    ... I thought it was a separate nut at first also, ... "nut" is actually part of the bushing. ...
    (rec.music.makers.guitar.acoustic)
  • Re: Tech EM flipper bushing puller
    ... head screw with nut, 1 washer, and a 32 mm socket. ... through the bushing so that the head was on the flipper side of the ... Then I placed the socket over the coil side of the bushing. ...
    (rec.games.pinball)
  • Re: Tech EM flipper bushing puller
    ... head screw with nut, 1 washer, and a 32 mm socket. ... through the bushing so that the head was on the flipper side of the ... Then I placed the socket over the coil side of the bushing. ...
    (rec.games.pinball)
  • Re: Antek transformers?
    ... I once mounted a toroidal transformer using rubber gaskets cut ... The rubber gaskets act as a cushion between the washer ... the coils and between the chassis and coils. ... lock washer and nut holds ...
    (alt.guitar.amps)
  • Re: Golf MKIII rear wheel bearing
    ... I've not read what the latest Haynes manuals say on the matter as I'm well in ... I usually nip up the nut first to ensure things are bedded down OK, ... just enough to slide the washer with a screwdriver. ... >> Just high melting point lithium grease - normal wheel bearing stuff. ...
    (uk.rec.cars.vw.watercooled)
Loading