Re: UST String balance issue

Tony Done wrote:
FWIW, I've been able to fix all the UST problems I've encountered with a) a loose friction-fit saddle, pin hole ramps or c) thin brass shims in the appropriate spot.

Tony D


Brass shims under the pickup? Or between pickup and saddle? Does this not alter the tone?

Jon

.

Relevant Pages

  • Re: UST String balance issue
    ... pin hole ramps or c) thin brass shims in the ... Tony D ... Brass shims under the pickup? ... Or between pickup and saddle? ...
    (rec.music.makers.guitar.acoustic)
  • Re: Opinions sought -- lap steel guitar
    ... Tony Done wrote: ... That looks like a wider pickup than the fender-style that I've ... Musicians Friend has a couple of lap steels that have standard ... Hey Tony, if you don't mind my asking, what string gauges do you use ...
    (alt.guitar)
  • Re: Gole Clark Guitars
    ... Of course Tony Done has been telling us this for quite a while. ... Have a look at the headstock joint and the back bracing if you get the chance. ... A very attractive design (best I've seen in a lap steel), but what I thought was an awful pickup. ...
    (rec.music.makers.guitar.acoustic)
  • Re: Opinions sought -- lap steel guitar
    ... maybe Tony can help me with that. ... bridge and neck side across the pickup. ... and the pole pieces are often ... This is the site I used to date my Supro ...
    (alt.guitar)
  • Re: Opinions sought -- lap steel guitar
    ... Tony Done wrote: ... But now I've got lap steel gas. ... That looks like a wider pickup than the fender-style that I've ... slide that I use for guitar slide playing. ...
    (alt.guitar)