Re: Tank for a carbureted model converted


"mfsmith1977" <mfsmith1977@xxxxxxxxxxx> wrote in message
news:1151627628.984857.74510@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
I want to change out my tank. I came into a tank for my 2006 Heritage
that is off a carbureted model.

I never realised Harley's could be SO exciting.

My question is, can I convert that
tank to be used on an EFI bike?

You can convert just about anything if you have the tools and a few
pictures/ideas of what's needed.

If you're going to drill, cut, or otherwise get "sparky" with the tank,
first run a pipe from an exhaust system of a running vehicle and direct the
gases into the tank. Do it for 1/4 hour and that should see all the
flammable stuff beaten into submission, allowing you to spark all you want.


--
Beav

VN 750
Zed 1000
OMF# 19


.

Relevant Pages

  • Re: Dot Regulations On Hydrostatically testing Cylinders
    ... even after taking mixing courses from a couple of different ... that you had to roll the tanks after a mix to make sure ... the gases were well distributed. ... but Mark choose to buy the customer a new tank. ...
    (rec.scuba.equipment)
  • Re: Dot Regulations On Hydrostatically testing Cylinders
    ... even after taking mixing courses from a couple of different ... that you had to roll the tanks after a mix to make sure ... the gases were well distributed. ... but Mark choose to buy the customer a new tank. ...
    (rec.scuba.equipment)
  • Tank for a carbureted model converted
    ... I came into a tank for my 2006 Heritage ... that is off a carbureted model. ... tank to be used on an EFI bike? ...
    (rec.motorcycles)