What a difference




Well, I finally got around to recapping and fixing up a bunch of cold
solder joints in the ignitor unit of my Virago.

What a difference!

Starts almost instantly, the idle is very smooth, holds high rpm's without
misfiring.

Total cost of this project:
1 - Skytrain Fare $2.50 for return trip.
2 - All capacitors $11.00
3 - Fresh roll of solder $15.00
4 - Flux remover $3.00
5 - Labour invested 2hrs $FREE

Total cost $31.00



--
Bobbie the Triple Killer is at http://members.shaw.ca/bobbie4/index.htm
Today's posting comes via the numbers 0 & 1, Suse 10.0 and Pan Newsreader.
http://www.opensuse.org/Download






.



Relevant Pages

  • Re: hard drive repair
    ... If the hard drive works at cold temperature, it looks like the circuit board ... I will try to re-solder all solder joints on the ... >> guarantee condensing water inside and making a real mess of everything. ...
    (sci.electronics.repair)
  • Re: Toshiba Satellite AC/DC Conflict
    ... Cold or bad solder joints ... will cause this on any laptop.. ... Prev by Date: ...
    (comp.sys.laptops)
  • Re: Capcom Pinball Magic all switches and solenoids die at once
    ... but I already had the power supply off to look for cold ... solder joints. ... Thus re-seating all of the connectors in the process. ...
    (rec.games.pinball)
  • Re: AAS Satisfied??
    ... you might want to have a tech check over the motherboard for cold ... solder joints. ...
    (alt.guitar)