Re: shifter pawl spring replacement
- From: Phil Boutros <philb@xxxxxxxxx>
- Date: 30 Aug 2006 21:50:53 GMT
Hunter <hunters@xxxxxxxx> wrote:
I am replacing the main drive gear in my 1993 FXDWG (hope Noobs' is
holding). I want to replace the shifter pawl assembly (springs, maybe
the pawl and plate). The manual states that the pin that holds the
pawl and springs to the shifter shaft is a "press fit." Is there a
technique to supporting the shifter shaft to get the pin out and then
back in? I don't want to screw up the new parts or bend the shifter
shaft assembly taking it apart.
In my experience, it's usually a pain in the ass, and it's
real easy to bend the shaft. It's much easier, and barely more
expensive, to just replace the whole assembly.
Phil
--
AH#61 Wolf#14 BS#89 bus#1 CCB#1 SENS philb@xxxxxxxxx
http://ah61.com EKIII rides with me. http://eddiekieger.com
"I know some day, the righteous will rejoice and sing." - Warrior King
.
- Follow-Ups:
- Re: shifter pawl spring replacement
- From: Hunter
- Re: shifter pawl spring replacement
- From: frito
- Re: shifter pawl spring replacement
- References:
- shifter pawl spring replacement
- From: Hunter
- shifter pawl spring replacement
- Prev by Date: New EKIII auction item
- Next by Date: Re: OT - Pluto no longer a planet
- Previous by thread: Re: shifter pawl spring replacement
- Next by thread: Re: shifter pawl spring replacement
- Index(es):
Relevant Pages
|
