ARM: Review - Armorscale 1/35 scale Armor Accessories
- From: AMPSOne@xxxxxxx
- Date: 30 Mar 2006 18:13:51 -0800
Accessory Review: Armorscale 1/35 Scale Armor Accessories
Kit number A35-007: 76.2 cm US M1 (Sherman) ammo; 24 pieces in turned
brass; price US $13.00
Kit number R35-001: Russian T-34/76 Large Rear Fuel Tanks; 52 parts
(30 in etched nickel, 22 in grey resin): price US $8.00
Kit number S35-001: US Antenna Mount (SRC 610 radio); 3 parts in
turned brass; price US $4.00
Advantages: well done and executed parts, good clear directions
Disadvantages: "new kid in town" may not be well known yet
Rating: Highly Recommended
Recommendation: for all armor fans looking for some upgrades
New companies are coming on line all the time, and this one,
Armorscale, is a relative newcomer out of Poland. Currently their range
covers over 90 different items in 1/72, 1/48 and 1/35 scales, and more
items are coming.
The three items reviewed here are typical of their range in 1/35; I
have not seen the 1/72 and 1/48 scale offerings, but the 1/35 ones are
very nice and relatively inexpensive for what the modeler gets.
First off is the 76mm ammo for the late model Sherman with the M1
series of guns. The kit offers 12 two piece rounds for the gun -
projo and casing - and provides for four each of the three main
types: HE-FRAG, AP, and APCBC. Detailed color painting instructions are
provided, and they will really set off a diorama of "bombing up" a
Sherman. (Note that the original rounds were unitary, so they have to
be assembled for use!)
Second is a pair of the rear fender polygonal fuel tanks from the late
Model 1941 and most Model 1942 T-34 tanks with 76mm guns. The kit
offers two exquisitely molded tanks in resin - the seams are
wafer-thin but present on both tanks with no nicks or chips, and even
have drain plugs molded into their bases - and a set of nickel
brackets and resin bolt heads for mounting them to the tank. They also
have excellent clear directions for assembly and installation.
Lastly is one of the most miserable things to install on a model tank
- the "whip" antenna base for the SCR-510/610 series radios.
Other nations found out that solid whip antennas and trees are not a
good combination, and thus put them in swivels for raising or lowering.
The US Army, famous for "soldier-proofing" what it cannot protect,
simply created spring-loaded bases with a stout cable running up
through them and base-loading the antennas. The ones that came with
most kits usually had a nasty seam or ejection pin mark on them, and
thus were a bear to clean up. At best the modeler could make one from
some rodding and Kadee HO scale model railroad coupler springs. These
nicely done turned bases obviate the need to do that, and while
non-operating (!) are very nice depictions of the originals.
Overall, this company appears to offer very good value for the money
and should do well. Currently the American distributor is Chesapeake
Model Designs, PO Box 393, Monkton, MD 21111 or check out their listing
at http://www.chesapeakemodels.com
Thanks to Bill Miley for the review samples.
Cookie Sewell
.
- Prev by Date: Re: The best store with clothes for you - EMBROFLY.com
- Next by Date: Re: Illegal Immigration, the Non-Issue of the Week??????????????
- Previous by thread: [no subject]
- Next by thread: Re: Illegal Immigration, the Non-Issue of the Week??????????????
- Index(es):
Relevant Pages
|
Loading
