Re: model jet engines

Don Bowey wrote:

On 1/21/06 9:52 AM, in article
28018-43D274E1-1078@xxxxxxxxxxxxxxxxxxxxxxxxxxxx, "Bill Sheppard"
<oldcoot@xxxxxxxxx> wrote:


Don is probably referring to the Dyna-Jet.

Bill(oc)



That's the one.

Is there anyone in the Portland/Vancouver area in need of one?  It just
doesn't fit in with my small electric planes.

Don

Kinda the antithesis of "silent flight", eh?

Apparently a few folks have built RC jets with those -- must be an exciting flight!

--

Tim Wescott
Wescott Design Services
http://www.wescottdesign.com
.

Relevant Pages

  • Re: Kits on the shelf.
    ... Midwest Aero Sport .60 ... Paul McIntosh's Ballistick(next to be built) ... ARF Airborne Models Aircombat .25 (was for my son until skateboards ect.) ... Wescott Design Services ...
    (rec.models.rc.air)
  • Re: Looks like TEXAS gets it
    ... Issuing all passengers a knife coated with lard is getting it. ... The flight that crashed in Pennsylvania was intended for the Pentagon, the reason that it didn't get there was because the folks on that flight heard about what was happening from friends and relatives, realized that the rules had changed, and did the appropriate thing. ... Wescott Design Services ... "Applied Control Theory for Embedded Systems" was written for you. ...
    (sci.electronics.design)
  • Re: A french product design student is looking for an internship
    ... > Has anybody actually built one? ... I've seen similar things with two rear wheels. ... change in the effective pivot point while keeping the thing going. ... Wescott Design Services ...
    (sci.electronics.design)