Re: PT-20 electric conversion...
- From: "Jim Slaughter" <jim@xxxxxxxxxxxxx>
- Date: Wed, 16 Nov 2005 20:19:18 GMT
check out www.flyhurricane.com
"The OTHER Kevin in San Diego" <skiddz "AT" adelphia "DOT" net> wrote in
message news:7e1nn158at06cn1345uou7262cmau5580e@xxxxxxxxxx
> Building an old PT-20 trainer with my son and decided to convert to
> electric power so we can fly at the local schoolyard and not annoy the
> neighbors with the noise of glow power.
>
> I've been doing some research and have come up with the following list
> of motor, ESC etc and was looking for opinions/comments from the more
> knowledgeable on my "solution":
>
> AXI 2820/10 External Rotor Brushless Motor
>
> Jeti Advance PLUS 40 Amp Brushless Controller with Program Card
>
> 45mm Spinner/Collet Shaft Adapter, 5mm
>
> 10x7 APC Prop
>
> Radial Mount Set for AXI 2820 and 2826 Series Brushless Motors
>
> (Also looking at this motor as it seem to have similar performance
> specs: PJS 3D 800E Outrunner Brushless Motor)
>
> Thunder Power 3S2P 4200 mAh "Pro Lite" 11.1V LiPoly Pack
>
> Thunder Power 2-5 Cell LiPo Balancer (Is this necessary? I've got a
> Triton charger)
>
> Or one of the following
>
> PQ "Twenty" 3 Cell 11.1V 3700 mAh LiPo Pack
>
> PQ 3 Cell 11.1V 4000 mAh LiPo Pack
>
> PQ 3 Cell 11.1V 4400 mAh LiPo Pack
>
> PQPCM3S PCM GUARD for 3S LiPoly Packs (Again, necessary??)
>
> I'm not sold on a particular brand so suggestions for other
> manufacturers would be appreciated.
>
>
> Thx!!
>
>
>
.
- Prev by Date: Re: Simple Green on sale @ Lowe's
- Next by Date: Re: Simple Green on sale @ Lowe's
- Previous by thread: Simple Green on sale @ Lowe's
- Next by thread: Re: PT-20 electric conversion...
- Index(es):
Relevant Pages
|
