Re: Trainer cable Futaba 9Z - FX-18

"R" <r.v.nospam@xxxxxxxxxx> schreef in bericht
news:4339937a$0$9051$ba620dc5@xxxxxxxxxxxxxxxxxxxxxx
> Does anybody know if it is possible to connect a robbe/Futaba FX-18
> (student) to a Futaba T9ZAP (teacher). The robbe catalog has lots of
trainer
> cables, but none for both T9ZAP and FX-18 transmitter.
>

Hi,

There is no problem to connect both TX for buddy box purpose. The 2 cables
you need have the following references :

1) Futaba F1576 : adapter-cable with the round Din connector on one side and
a mono female jack 3.5mm (1/8"),
the round Din being for master TX. See here for an example :
http://shop.lindinger.at/ProductDetail.asp?ProductID=11127&NextPage=%2FProductTree%2Easp%3FCategoryID%3D478%26PPP%3D%26SP%3D0

2) Futaba or Robbe 8362 : trainercable with on one side mono male jack 3.5mm
(1/8") and on the other side mono jack male 2.5mm (1/10").
here a pic :
http://www.e-heli-shop.de/shop/product_info.php?products_id=1235

Of course, it's very easy to solder a cable yourself : use figure 7f-05 of
chapter 7 of my website.
Anyway, do not forget to set the specific switch inside the FX18 on
"stu"-position to use as slave (student) !!!

Olivier
--
http://users.belgacom.net/TX2TX : buddy box compatibility problems between
different brands of RC-transmitters.
To answer, remove "nopub" from tx2tx@xxxxxxxxxxxxxxxxx



.