Saito 40 rear cover
I broke this part called a rear cover . its the part that holds the carb.
I called Horizen and they have it on back order, with no date of arrival.
Does anyone know of a scource of this item. Even one from an engine no
longer in use.
Thanks
Carl Anderson
.
Relevant Pages
- Re: All composite bikes are Fredly-
... > I notice you don't mention the Super Record crankset or rear ... > derailleur. ... I broke mine too back in 1985. ... Prev by Date: ...
(rec.bicycles.racing) - Re: Another PU8
... When you crank it which end to you fit the starting handle as the rear is ... We pulled the heads this morning, two stuck open valves and a stuck cam ... down't carb and gave a prolonged whirl with the handle but not a bit of ... Cut off the copper inlet pipe which hangs on two small 1/4" screws in the ...
(uk.rec.engines.stationary) - Re: Ethical delima
... For the carb, I mixed & matched parts from the carb Craig sent me. ... stupid how Honda no longer sells a needle and needle seat. ... On the rear end, the upper heim joint was kaput. ... single track, knarly jeep road, and some highway. ...
(rec.motorcycles.dirt) - Ethical delima
... For the carb, I mixed & matched parts from the carb Craig sent me. ... On the rear end, the upper heim joint was kaput. ... single track, knarly jeep road, and some highway. ...
(rec.motorcycles.dirt) - Re: Briggs and Stratton engine. (Off topic)
... The carb is mounted to the gas tank. ... off to clean it but there is a long pencil looking plastic tube from ... Answer as to why it will not start "It broke off." ...
(rec.crafts.metalworking) |
|
