Re: Twin Jet problems!
- From: "PCPhill" <ptr@xxxxxxxxxxxxx>
- Date: Fri, 29 Jul 2005 19:44:39 -0400
Isn't that backward? the lettering should be toward the nose of the plane
for either pusher or tractor.
PCPhill
"Fubar of The HillPeople" <fubar1@xxxxxxxxxxxxxxxxx> wrote in message
news:%GyGe.33353$aA5.32313@xxxxxxxxxxxxxxxxxxxxxxx
> Got the props on properly? If they are the little white props on the black
> rubber hubs (Graupner props), the lettering on the props need to be facing
> the rear of the jet assuming its a pusher. This is a very common problem
> with Zagi's and most electric wings in general. The white prop must be
> removed from the hub and installed in reverse.
>
> --
> Dan
> AMA605992
> KE6ERB
> http://www.fubar1.net
> "I've heard the screams of the vegetables..."
> Take out the "trash" to reply
>
> "Len Cuff" <len.cuff@xxxxxxxxxxxx> wrote in message
> news:es7le1l8t2ai67oklgfqmllo12d8qj48sl@xxxxxxxxxx
>> Just bought one of these complete with 2 400 motors. Built fine and
>> fitted a 3000mh Nimh 9.6 pack and a 35A ESC. Problem is that it just
>> won't get into the air! Simply flies in a downward direction and land
>> about 20 feet away. Obviously I'm doing something wrong but any ideas?
>>
>> TIA
>>
>>
>> cheers,
>> Len
>
>
.
- References:
- Twin Jet problems!
- From: Len Cuff
- Re: Twin Jet problems!
- From: Fubar of The HillPeople
- Twin Jet problems!
- Prev by Date: Re: C of G Question:
- Next by Date: Re: Ohio RC 10-300 bipe
- Previous by thread: Re: Twin Jet problems!
- Next by thread: Ohio RC 10-300 bipe
- Index(es):
Relevant Pages
|
