Lionel ZW transformer

I need to replace the power cord on a Lionel ZW transformer. The top of the
transformer case comes off easity, but I can't see where the power cord is
attached. Is the power cord attached at the very bottom of the transformer?
Thanks for any help. Frank

.

Relevant Pages

  • Re: EM TECH: Aztec not starting
    ... across the switch will verify this. ... I would suggest leaving the power cord alone, as long as it doesn't have ... different story, if it looks suspect, (ie. exposed wire and lugs). ... sounds like your set up at the transformer is typical WMS. ...
    (rec.games.pinball)
  • Re: HQ-145/Worth Recapping?
    ... grab the power cord out from the wall before the transformer is fried to a ... by the way...make sure you fuse the ... HQ-145 BUT DON'T DEPEND ON IT FOR PROTECTION. ... the transformer will be protected from total damage. ...
    (rec.radio.amateur.boatanchors)
  • EM Tech Question: Gottlieb Knock Out
    ... Unfortunately, after I unplugged the game to tinker some more, the ... I took this time to replace the power cord. ... HOT" pinned between the screw and the metal plate. ... voltage going into the Fuse or Transformer, is it safe to place a clip ...
    (rec.games.pinball)
  • Re: EEs? power strip adjacent walwart hum....
    ... I had the wart in the rack case and there was a terrible hum....I moved the location and the hum mostly went away. ... The transformer in the wall wart creates an electromagnetic field around ... the AC power cord what's already there. ... the current it would induce in a single, ...
    (alt.guitar.bass)
  • Re: Changing Power Cord on An Old Lab Series L2
    ... the power cord as the insulation is all cracked, ... I am guessing that all I have to do is take ... the amp guts out of the amp and reconnect a new cord the the ... connected directly to the transformer. ...
    (alt.guitar.bass)