Re: Chas your opinion please

On May 30, 10:20 am, r payne <son_of_bluegr...@xxxxxxxxx> wrote:
Finally got around to trying my hand at making a stiching awl. I put
pictures herehttp://www.geocities.com/son_of_bluegrass/stichingawl
with the last few holes I made with it. Does that look about right?

The blade length is about 3/4" with about 0.65 sharpened, the width is
0.095" and thickness of 0.05".

Thanks
ron


******Hurry up Charlie before Kramer pokes his snout in and claims
the glory.

*GRIN*

.

Relevant Pages

  • Re: Here they are- the baby and the monster
    ... power hacksaw blade with more HSS or mild steel) and ream to ... I like drilled holes for my slab handled knives tho. ... So far none of his HSS knives have broken from that treatment. ...
    (rec.knives)
  • Re: 2-1/4" hole saw and galv. sheet metal
    ... The holes should be about twice or more in diameter of the thickness of the blade to work, and should at least touch the cutting line so that the chips don't get raked around the circumference of the cut and fill up the teeth. ... Last, if you can reach inside the duct, you could use a punch and die set to make holes cleaner and faster than sawing. ...
    (rec.crafts.metalworking)
  • Re: How to chop up a 50# chunk of soft lead?
    ... never seen his place so full before) I asked about scrap lead. ... I scratched to top with a wood screw and it seems kind of soft. ... Next I tried drilling holes in it with a 1/2" drill, ... A sawzall with a wood blade would work. ...
    (rec.crafts.metalworking)
  • Re: Sort of, kind of, turning related... sharing some pictures
    ... couple of pictures snapped of one of my pieces, ... The blade lifts off the stand for use, and sits as shown for display. ... The scales are attached with two-ton epoxy using "epoxy rivets" (holes ...
    (rec.crafts.woodturning)
  • Sort of, kind of, turning related... sharing some pictures
    ... couple of pictures snapped of one of my pieces, ... The blade lifts off the stand for use, and sits as shown for display. ... The scales are attached with two-ton epoxy using "epoxy rivets" (holes ...
    (rec.crafts.woodturning)