Re: Remington 700 Freebore
- From: Jeff Olsen <handywired@xxxxxxxxxxxxx>
- Date: Sat, 29 Apr 2006 12:34:30 +0000 (UTC)
in article e2stff$f1t$1@xxxxxxxxxxxxxxxxxxxxx, Mike Hogan at
mhogansrATcomcast.net@xxxxxxxxxxxx wrote on 4/28/06 4:14 AM:
# I recently measured the freebore distance in my Model 700 VS .308 and found
# it to be quite long. The bullet in a Federal Gold Medal Match factory round
# is back about .175" from the lands. I've always understood that seating a
# bullet
# to where it is almost touching the lands gives improved accuracy, but that
# seems
# impossible in this rifle. Is this typical for a 700?
It's all over the map, but yes I'd say Remington does chamber their rifles
with a lot of leade to the lands. My two custom-barreled rifles have such
short freebore that with some bullets I have a hard time loading to the
nominal OAL for a cartridge! Having said that, I have gotten great accuracy
with factory M700's, freebore or not. Just mess with the OAL and you'll hit
some sweet spots. My 30-06, before it got the new barrel, shot best well
off the lands. My .358 BLR was the same way, it hated being loaded up near
the lands but shot OK with the bullet pulled back some. So nothing is
written in stone. It might shoot just fine with the bullet way off the
lands.
If it bugs you too much, $400-$500 or so will get a new premium barrel in
the profile of your choice installed on the rifle. I had Pac-Nor do the
work on two of my rifles and am very pleased with the result.
-jeff
---------------------------------------------------------------------------
Learn about rec.guns at http://www.recguns.net
Win a Fulton Armory AR-15 rifle chambered in 6.8mm Rem SPC and protect your
2nd Amendment Rights at the same time! See details at http://www.myguns.net
---------------------------------------------------------------------------
.
- Follow-Ups:
- Re: Remington 700 Freebore
- From: Mike Hogan
- Re: Remington 700 Freebore
- References:
- Remington 700 Freebore
- From: Mike Hogan
- Remington 700 Freebore
- Prev by Date: Re: antique 50 caliber chain and empty shells
- Next by Date: Re: 300 WSM
- Previous by thread: Re: Remington 700 Freebore
- Next by thread: Re: Remington 700 Freebore
- Index(es):
Relevant Pages
|