Re: H&R 929
stans4@xxxxxxxxxxx wrote:
# Ken wrote:
# # I have an old H&R 929. Could any gunsmiths,etc out there tell me what
# # it would cost to replace all the springs in the gun, maybe tune it /
# # blue it?
# #
# # TIA,
# # Ken
# #
# Far more than it's currently worth. Fitting any parts on H&R revolvers
# is a royal pain, I've done enough of them. Parts are not drop-in
# interchangeable, they have to be fitted and they're soft. The cylinder
# ratchets and hands tend to wear, when that happens, they don't carry up
That's what mine was doing & your right about the parts being soft &
needing to be fitted - etc
Thanks for responding - I really appreciate it.
-----------------------------------------------------------------------
Learn about rec.guns at
http://www.recguns.com
-----------------------------------------------------------------------
.
Relevant Pages
- Re: Want to buy Ruger Blackhawk 9mm cylinder stainless
... Buying one and fitting it will probably cost as much or more than ... you've got in the gun. ... Just having the cylinder isn't the end of the ... Blackhawk cylinders in the white, ...
(rec.guns) - Re: The Culture Wars Go to High School
... >> I don't even want to THINK about what Interthingy cost me. ... garment, not even if I did wear it every day. ... turning it inside out and hanging it up in the bathroom to ...
(rec.arts.sf.fandom) - Re: S&W VersaVault Problem
... a replacement spring at MacMaster-Carr. ... Cost: $1.25/ea., Qty 2 Required ... much identical dimensionally to the factory cylinder. ... The safe now functions perfectly. ...
(rec.guns) - Re: Nitrogen gas for Shock = $30 to get rebuild filled - yikes!!!!!! Is there a relatively inex
... for somewhere along the cost of 3 or 4 recharges. ... I think some shocks will take up over 200 psi so you probably would want a regulator which goes up to 400 psi. ... There are different adapters for the inert gas regulators so you can use it on a carbon dioxide cylinder as well. ... Actually all you would really need for shock purposes is a tiny little lab bottle. ...
(rec.motorcycles.dirt) - Re: Hong Kong Tailors--Please Help!
... It's something I'll probably only wear once or twice, ... bridesmaid experiences, but I'd like it to look nice (and if I could ... Depending on the cost and time involved, I might also want to get ... several nice suits made for work. ...
(rec.travel.asia) |
|
