Re: Baby pac harness or replacement connectors

I've fixed a few of these a while back...

I'd recommend rebuilding the PS board. There really isn't a lot to it. If
there are power problems, you have to fix that first. Connectors are
available most usual places. Unless they are corroded, I'd look at the
communications chips first rather than the connectors. Press the test button
on the Vidiot and watch the screen to see the communications test results.
The manual is really helpful in testing the game. There are also some common
problems discussed on my website...
http://www.appolo.com/projects/4babypacs/4_baby_pac.htm

--
Mike Appolo
http://www.appolo.com


"RRcade" <jaschebrock@xxxxxxxxx> wrote in message
news:1149048250.800490.270420@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Guess what...I got a baby pac with corrosion problems. I installed the
mpu repair kit, and cleaned all pins on all boards but still not
communicating. Any suggestions on replacing connectors? Also does
anyone have a complete working mpu and power supply? I'm not getting
voltage at all test points on power module
thanks



.

Loading