Re: TECH: Neotec NT2700 Image Issues

Tom wrote:
On Apr 2, 7:23�am, Tom <tomter...@xxxxxxx> wrote:
On Apr 1, 8:32�pm, James Sweet <jamesswe...@xxxxxxxxxxxxx> wrote:





Tom wrote:
I just installed a new Neotec NT2700 into a Golden Tee Fore Complete.
The game board has previously worked on a WG standard resolution
monitor and the dip switch #1 is set to on as the manual indicates for
standard resolution.
The issue I am having is the image on the monitor signal is pretty
garbled and appears to be upside down and upside down, sounds like a
polarity issue? Not quite sure what to change on the monitor board to
correct.
Any thoughts appreciated.
Tom
tomter...@xxxxxxx
Is it garbled or just upside down? You can flip the image by swapping
the yoke wires, usually yellow and green are vertical, swap yellow with
green to flip it that way. If you end up with a mirror image, then red
and blue and often horizontal, swap red with blue and that will flip it
that way.
Actually both, what I can make out appears to be upside down and
reversed.

Tom- Hide quoted text -

- Show quoted text -

I found a black and white wire reversed on the connector so now I just
have a reverse image where the picture is backwards. Anyone know which
wires will flip the image?


Swap the horizontal deflection yoke wires. I mentioned already these are normally red and blue, flip the connector around so red plugs in where blue was and vise versa. This is assuming a horizontally mounted monitor.
.

Relevant Pages

  • Re: TECH: Neotec NT2700 Image Issues
    ... The game board has previously worked on a WG standard resolution ... garbled and appears to be upside down and upside down, ... Not quite sure what to change on the monitor board to ...
    (rec.games.video.arcade.collecting)
  • Re: Help: How to Fix Ms.Pacman Cocktail Table????
    ... a couple credits and select a two player game. ... monitor flipping is going to be a pain. ... Your monitor is in upside down, you either need to flip the monitor around or flip the yoke wiring plugs around. ...
    (rec.games.video.arcade.collecting)
  • Re: TECH: Neotec NT2700 Image Issues
    ... The game board has previously worked on a WG standard resolution ... The issue I am having is the image on the monitor signal is pretty ... You can flip the image by swapping the yoke wires, usually yellow and green are vertical, swap yellow with green to flip it that way. ...
    (rec.games.video.arcade.collecting)
  • TECH: Neotec NT2700 Image Issues
    ... The game board has previously worked on a WG standard resolution ... The issue I am having is the image on the monitor signal is pretty ... garbled and appears to be upside down and upside down, ...
    (rec.games.video.arcade.collecting)
  • Re: TECH: Neotec NT2700 Image Issues
    ... The game board has previously worked on a WG standard resolution ... Not quite sure what to change on the monitor board to ... have a reverse image where the picture is backwards. ...
    (rec.games.video.arcade.collecting)
Loading