Re: tech: adpater to program 2532 when programer is set to 2732
- From: Matty-t <mspynda@xxxxxxxxx>
- Date: Sun, 29 Jun 2008 12:14:17 -0700 (PDT)
On Jun 29, 2:43 pm, "Shatter Proof" <shatter_pr...@xxxxxxxxxxxxx>
wrote:
I found a few write-ups on how to do this, but a few seemed to contradict
each other.
Can someone set me straight?
I just took the pinouts for each, and printed them out and used them
to make a 'crossover adapter' that basicly just swapped some pins
around. Pop the 2532 in the top and pop the fixture into your
programmer.
I have only used it to read them from my USB programmer, I always
used my needhams 20 to program so I can't verify that it works. My top
USB programmer has not liked 2732 programming since I bought it and
only works like 1 out of 5 times regardless of the supply current. It
will read them though and since I usually work in windows at the shop
I can toss them into the top and verify them, but have to reboot in
DOS to burn them with the needhams =( And thats mainly because the
needhams driver and port pooling tend to go haywire in windows. It
will work fine and then out of the blue I have to restart it because
it forgot a module was loaded, etc.
It's a messed up situation. I swear I'll fix it one of these days..
lol.
I built mine with a ZIF socket for the top end fixed to a small pre-
drilled PCB, and headers out of the bottom. All the jumpering is done
on the board to change the pinouts. Works fine.
- Matt
.
- References:
- tech: adpater to program 2532 when programer is set to 2732
- From: Shatter Proof
- tech: adpater to program 2532 when programer is set to 2732
- Prev by Date: Re: wtb GT 29 coarse upgrade kit.
- Next by Date: Sega Sound help (outrun, super hang on etc)
- Previous by thread: tech: adpater to program 2532 when programer is set to 2732
- Next by thread: Sega Sound help (outrun, super hang on etc)
- Index(es):
Relevant Pages
|
