Re: Space Invaders Deluxe + Braze multigame
- From: braze <braze.rgvac@xxxxxxxxx>
- Date: 8 May 2007 06:54:05 -0700
Check out the SI multi selftest documentation at
http://www.brasington.org/arcade/sim/selftest.shtml
It sounds like the memory test has started, has detected a
bad ram. If so, it will 'beep' out a code, then pause, then reset
and repeat all over again. Of course you need your audio
to be working to hear the beeps/pulses.
On May 8, 7:41 am, matsod <mat...@xxxxxxxxx> wrote:
Hi! This is my first post to this group, but I guess it won't be the
last... =)
On to my problem
I have a SI Deluxe board that I guess have some faulty ROMs since I
get all kind of garbage on the screen when I fire it up. But, if I
remove the H-ROM I get very nice lines across the screen, so I guess
CPU and RAMs are ok.
The Power Supply is working fine and all the correct Volts are
present. And I checked the slamtilt.
So, I thought I don't care about the ROMs and I buy me one of the
Multigame kits from Scott Brasington and plugged it in.
The problem is, the kit doesn't do anything at all. At power I get
garbage, and after a second or two... garbage again, but a little
different pattern. Then nothing. And I have not plugged it in
backwards or anything.
Do you think it's my board or the Multigame Kit that is bad? Anything
else I should check?
.
- Follow-Ups:
- Re: Space Invaders Deluxe + Braze multigame
- From: matsod
- Re: Space Invaders Deluxe + Braze multigame
- From: matsod
- Re: Space Invaders Deluxe + Braze multigame
- References:
- Space Invaders Deluxe + Braze multigame
- From: matsod
- Space Invaders Deluxe + Braze multigame
- Prev by Date: Re: Space Invaders Deluxe + Braze multigame
- Next by Date: FS Zaxxon PCB with HS save kit installed
- Previous by thread: Re: Space Invaders Deluxe + Braze multigame
- Next by thread: Re: Space Invaders Deluxe + Braze multigame
- Index(es):
Relevant Pages
|
