Re: Newbie Help: Double Dragon Won't Turn On Anymore



No, it's plugged in and not the back door switch :-)

On 28 Apr 2007 20:20:08 -0700, William <wbowie2003@xxxxxxxxx> wrote:

On Apr 28, 9:24 pm, Strohz <str...@xxxxxxxxx> wrote:
I picked up my first real video game last week, a Double Dragon, and
it worked fine until today. I went to turn it on and now nothing
happens, no power to anything. I noticed there were two fuses (main &
monitor) down below so checked both but they tested fine. Since I
have no idea what I'm doing, is there something obvious I should check
or could the power supply have gone? Is there another fuse somewhere?
Where would a newbie begin? And is there a good repair guide
website on the internet like there is for pinball machines? Thanks
for all the help,

If you have a manual.. look for test points to verify that you are
getting all the correct voltages.

also..did it stop working after removing the back door?

.



Relevant Pages

  • Re: WTB & TECH: SWE1 Fuses & Issue(s)
    ... Also, while taking a peek yesterday while the fuses were off, I ... thx, dp ... How to test the coin door switch? ... I'm showing the same fuses as bad, but my coin door ...
    (rec.games.pinball)
  • Re: WTB & TECH: SWE1 Fuses & Issue(s)
    ... thx, dp ... Don't remember if it was all of the fuses, ... it could be as simple as a bad door switch. ... I'm showing the same fuses as bad, but my coin door ...
    (rec.games.pinball)
  • Re: WTB & TECH: SWE1 Fuses & Issue(s)
    ... is the realy a socketed component or am I going to have to do some ... Don't remember if it was all of the fuses, ... it could be as simple as a bad door switch. ... I'm showing the same fuses as bad, but my coin door ...
    (rec.games.pinball)
  • Re: WTB & TECH: SWE1 Fuses & Issue(s)
    ... Don't remember if it was all of the fuses, ... thx, david p ... it could be as simple as a bad door switch. ... I'm showing the same fuses as bad, but my coin door ...
    (rec.games.pinball)
  • Re: WTB & TECH: SWE1 Fuses & Issue(s)
    ... tktlwyr wrote: ... Don't remember if it was all of the fuses, ... it could be as simple as a bad door switch. ... I'm showing the same fuses as bad, but my coin door ...
    (rec.games.pinball)