Re: Interest in SW/ESB switchable PCB
- From: "Bob D." <potf77@xxxxxxxxx>
- Date: 15 Sep 2006 07:57:08 -0700
All I wanted was a blank pcb. Nothing more nothing less. They
were offeredd here years ago by John Linville based on Cliff Koth's
hack around the time Clay was offering his multi kit. I just wanted to
know if anyone would be interested in getting some pcb manufactured so
they can build the kit themselves.
I was just going to get an order to get the pcbs manufactured.
Not a kit just a pcb board.
I will wire one up myself, forget a manufactured pcb board. No big
deal.
BTW is a pile = 4?
Bob
Mark C. Spaeth wrote:
Bob D. <potf77@xxxxxxxxx> wrote:
: I am talking about the daughter board that will hold U1, U2, U3 and U4
: (based on Cliff Koth's hack) that will then be connected to the main
: pcb via U4. Of course you will have to do the rest of the wiring
: needed. I figure the cost would still be around 25.00 for just the
: unpopulated pcb board..
The biggest cost of the SW/ESB either conversion or multigame is
the pile of new bipolar proms for the AVG board... The PCB is almost
negligible.
--
Mark Spaeth mspaeth@xxxxxxxxxxx
50 Vassar St., #38.265 mspaeth@xxxxxxx
Cambridge, MA 02139
(617) 452-2354 http://rgvac.978.org/~mspaeth
.
- References:
- Interest in SW/ESB switchable PCB
- From: Bob D.
- Re: Interest in SW/ESB switchable PCB
- From: chips4sle@xxxxxxx
- Re: Interest in SW/ESB switchable PCB
- From: Bob D.
- Re: Interest in SW/ESB switchable PCB
- From: Mark C. Spaeth
- Interest in SW/ESB switchable PCB
- Prev by Date: Re: Good deal on NOS CPO for Phoenix on ebay....
- Next by Date: Re: Poll: Things you have traded for a game.
- Previous by thread: Re: Interest in SW/ESB switchable PCB
- Next by thread: 1943 test mode
- Index(es):
Relevant Pages
|
