Re: Help! Millipede Speaker Grill screws!

Considering these are anchored threads built into the cabinet it might
be difficult to bring the Millipede cabinet to the hardware store...

I have a grill - no screws - screws screw into the cabinet threaded
anchors ;)

Rob Carroll wrote:
If you've got an original one, bring it to the hardware store with you
and find a nut that fits it.

Voila.


Cyrus Cosmo wrote:
Could someone PLEASE take a picture of the screw/bolt that holds the
Millipede speaker grill in place? These don't appear to be a standard
bolt/screw. I've tried 5 different sizes and cannot seem to find one
that fits and the screw size is not in the parts list in the manual.

Thanks!

.

Relevant Pages

  • Re: Hanging kitchen cabinets?
    ... case- the screws will pull through. ... Short version- a rail screwed to wall, that has an upper lip that sticks out. ... You hook the rail on the cabinet onto the rail on the wall, ...
    (alt.home.repair)
  • Re: How to install a sewing machine into drop down cabinet.
    ... How do I install the machine into the cabinet. ... can't get any to line up with the screws on the machine... ... The sewing machine manual didn't offer any guidance. ... You may have to drill new holes in the ...
    (alt.sewing)
  • Re: Cab question
    ... machines screws through the baffleboard into T nuts works, got double 18 sub cabinets that take 1 K each. ... Porting the cabinet will change everything, new rules; but the mounting is still good ... VW Beetle than purist cabinet design - but they worked for a lot of years. ...
    (rec.music.makers.bass)
  • Re: What size drill bit for 1/4" mounting screw?
    ... I think the cabinet bottom is a material similar to ... Sony only described the screws as mounting screws. ... adjustable spacers to enable the radio to fit under any cabinet. ... Mary Weatherford wrote in message ...
    (alt.home.repair)
  • Re: Servicing TEAC cassette deck
    ... On the chassis there are plenty of Allen plus some Phillips ... >>> screws, but I do not want to remove them without knowing which does what ... > cabinet, to avoid transferring vibrations from the chassis/motor unit. ... would keep in place, say, the 'floating deck mech'. ...
    (uk.rec.audio)