Re: Tech: Pac board stuck in test mode


thrushguy wrote:
Hi everyone,
I've been tooling around the internet and the google archives seeing if I
could find a lead for this problem. I've replaced both the packs at RM7 and
RM8. I also think I read that the 367s help control the dip switches and
such. The board boots through the test patterns but then it goes straight
to the test screen as though the test switch is turned on. This board is
using a jamma to pac adaptor that I've used on tons of other boards and have
tested other working pac boards on it so I know the adaptor and setup is
good. Any ideas from here? Or does anyone know which 367 it may be? I'd
rather not have to replace all 4 or 5 but I will if need be.

Thanks, Scott

--
www.agelessarcade.com
Hamden, CT 06518

.