Re: Star Wars Cockpit 19" over to 25" transplant project results up.

For the socket I ended up replacing it with one from a 4900.
I used the same yoke yes. 6100
Convergence was a bitch.
I cut and grinded away the the frame with the frame mounted power
transistors for mounting purposes. Had to make up for the heat
dissipation loss with heat sync mods added.

It was heck of a job and Id do it again!. thanks guys for all the kind
words.

Chad

www.arcadecup.com




LouiSurfer wrote:
Hey Chad,

for reference, what type of monitor did you get that tube out of (like
some type of standard wells K7000 series ?

Also, I assume you used the 6100 yoke, how tough was the convergence
process?

Lastly did the pins of the tube line up, did you have to cut/grind
anything?

Thanks,

L


Wish-Bringer (Chad Entringer) wrote:
Here are pictures of results achieved when transplanting a 19" 6100
vector over to a new 25" tube. Certainly one to share. Good stuff. I
really enjoyed this project. Its pure eye candy!

http://www.arcadecup.com/swa_25inch.htm

, Chad.

.

Loading