Re: G07 stumper...

Scott,

I had this very same problem not so long ago with my tapper ct, if you
google you might even find the thread. My double or ghosted image was
corrected by adjusting the horizontal width coil - I had replaced mine and
it was way off. I also re-installed the ground wire at the same time but my
guess is that the Hcoil was the culprit. Make sure you use one of those
plastic tools to adjust it...not a metal one!

Chris M

<scott@xxxxxxxxxxxxxxxxxxxx> wrote in message
news:1133660602.855581.125490@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> Been working on a game for a customer that told me intitally that the
> game had a rough trip to his home. He wasn't kidding. But after
> repairing his board and rebuilding his power supply, his game game up
> and worked just fine...
>
> Except for an odd double image problem on the monitor. You could see
> two images somewhat overlapping of the same things.
>
> Hooking it up to another G07 and I could see that the board is fine.
> Works perfectly with the second monitor.
>
> I went in to do the cap kit and found some odd things, including a cap
> that had been totally removed. Alas, the cap kit made the colors nice,
> but the double image problem remains.
>
> Grounds are fine.. and it works fine with my test monitor.
>
> Any other ideas on this one? The convergence rings are hot glued
> solidly in place, but I'm starting to think this might be in there
> somewhere, as everything else on the chassis seems fine.
>


.

Relevant Pages

  • Space Duel and Afterburner for Vector Work
    ... The game is complete for the most part. ... Spot killer on on what is a rebuilt super nice monitor. ... from sharp to blurry when it would first warm up and then hold on ... I did a cap kit and no help. ...
    (rec.games.video.arcade.collecting)
  • Re: Newbie needs some pointers
    ... to bring this game back to life. ... take care of the monitor issue, strip the peeling crap off the control panel ... A $6 cap kit will get you a good game. ... Bondo and water based paint works good, ...
    (rec.games.video.arcade.collecting)
  • Re: Is there a site on the net that shows a pic of Nintendo Sanyo 20EZ monitor problems?
    ... However I'm curious to if I have a monitor or board issue ... with my game. ... I remember a few years ago I stumbled upon a arcade game monitor ... certain before doing a cap kit on this game if this is the problem. ...
    (rec.games.video.arcade.collecting)
  • TECH: G07 stumper...
    ... Been working on a game for a customer that told me intitally that the ... Except for an odd double image problem on the monitor. ... I went in to do the cap kit and found some odd things, ...
    (rec.games.video.arcade.collecting)
  • Re: Congo Bongo issue
    ... I'm just about brand new to the world of arcade game collecting. ... on as normal, sounds came out normally, but no picture. ... I am of course leaning towards it being a monitor issue, ... make and model the monitor is to know what cap kit to get? ...
    (rec.games.video.arcade.collecting)