Re: Super Megatouch IV problems

ok thanks. Then it for sure is missing. Does this controller, once I
get one, simply plug
into the COM port on the motherboard and that's it? Or does it attach
to the monitor too?

.

Relevant Pages

  • Re: VIA IDE controller not detected on RELENG_6
    ... indicates strongly that what you have is an Asus motherboard with an VIA ... your system then the PATA controller should be recognized correctly. ... atapci0: port ... 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 15.1 on pci0 ...
    (freebsd-stable)
  • Re: VIA AC97: mic and boxes want same "port" for the cable
    ... When you switched to XP you may have lost some motherboard specific ... >> cable into the left port. ... As I can't plug both into that port, ... >> feedback getting louder and louder as soon as a volume treshold is ...
    (microsoft.public.windowsxp.hardware)
  • Re: P5E3 Deluxe and external Esata drive setup ???????????????????????????????
    ... my external Esata drive enclosure. ... i plug it in to the port on back ... of motherboard but nothing shows up inon my system, ...
    (alt.comp.periphs.mainboard.asus)
  • Re: /dev/modem
    ... > plug in password rdfd.so loaded ... > removed stale lock on modem ... >> motherboard com port, if it exists for that number, would be disabled ...
    (comp.os.linux.setup)
  • panic: APIC: Previous IPI is stuck
    ... pcibus 0 on motherboard ... <Parallel port bus> on ppc0 ... GEOM_MIRROR: Device mirror0: provider da0 detected. ... Disk da1 attached to usr2. ...
    (freebsd-stable)