Re: tech: whats wrong with this monitor?

It probably has one or more defective or marginal parts and or solder
connections

--
Art
<spokexx@xxxxxxxxx> wrote in message
news:1130127380.850205.61070@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> that much is true :)
>


.

Relevant Pages

  • Re: how do printed circuits break?
    ... Physically broken/cracked surface mount components or the solder ... connections to same. ... Rarely visible to the naked eye. ... Prev by Date: ...
    (sci.electronics.repair)
  • Re: Speaker troubles
    ... I looked for lose connections and there ... >> the speaker it seemed to be burnt (there are black and brown marks ... solder and is supposed to burn away when you solder but never completely ... Prev by Date: ...
    (rec.audio.tech)
  • Re: Fibonacci Numbers & Applied Math
    ... Connections: The Geometric Bridge Between Art and Science ... proportion in architecture, ancient geometry, megalithic stone circles, ... >also subscribes to the Fibonacci Quarterly. ...
    (sci.math)
  • Re: NGG (WPC-95) resetting
    ... It is not uncommon for Midway/Williams boards have weak or light solder ... You should definately refresh the solder connections for the power ... Tested wall voltage ... caps with me and I thought replacing C11 & C12 was my best bet given ...
    (rec.games.pinball)
  • Re: Poll: electrical connector crimpers/dies
    ... :> I solder my connections because I do not have the correct crimping ... Burndy (for their terminals and related crimpers) ... Therefore, if you are trying to "only add lightness", avoid solder! ...
    (rec.aviation.homebuilt)
Loading